diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index fbb4a7d..4bb6e0c 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -594,106 +594,106 @@
 
 /***************************************************/
 
-cmd_tbl_t U_BOOT_CMD(SIUINFO) = MK_CMD_ENTRY(
-	"siuinfo",	1,	1,	do_siuinfo,
+U_BOOT_CMD(
+	siuinfo,	1,	1,	do_siuinfo,
 	"siuinfo - print System Interface Unit (SIU) registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(MEMCINFO) = MK_CMD_ENTRY(
-	"memcinfo",	1,	1,	do_memcinfo,
+U_BOOT_CMD(
+	memcinfo,	1,	1,	do_memcinfo,
 	"memcinfo- print Memory Controller registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(SITINFO) = MK_CMD_ENTRY(
-	"sitinfo",	1,	1,	do_sitinfo,
+U_BOOT_CMD(
+	sitinfo,	1,	1,	do_sitinfo,
 	"sitinfo - print System Integration Timers (SIT) registers\n",
 	NULL
 );
 
 #ifdef CONFIG_8260
-cmd_tbl_t U_BOOT_CMD(ICINFO) = MK_CMD_ENTRY(
-	"icinfo",	1,	1,	do_icinfo,
+U_BOOT_CMD(
+	icinfo,	1,	1,	do_icinfo,
 	"icinfo  - print Interrupt Controller registers\n",
 	NULL
 );
 #endif
 
-cmd_tbl_t U_BOOT_CMD(CARINFO) = MK_CMD_ENTRY(
-	"carinfo",	1,	1,	do_carinfo,
+U_BOOT_CMD(
+	carinfo,	1,	1,	do_carinfo,
 	"carinfo - print Clocks and Reset registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(IOPINFO) = MK_CMD_ENTRY(
-	"iopinfo",	1,	1,	do_iopinfo,
+U_BOOT_CMD(
+	iopinfo,	1,	1,	do_iopinfo,
 	"iopinfo - print I/O Port registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(IOPSET) = 	MK_CMD_ENTRY(
-	"iopset",	5,	0,	do_iopset,
+U_BOOT_CMD(
+	iopset,	5,	0,	do_iopset,
 	"iopset - set I/O Port registers\n",
 	"PORT PIN CMD VALUE\nPORT: A-D, PIN: 0-31, CMD: [dat|dir|odr|sor], VALUE: 0|1"
 );
 
-cmd_tbl_t U_BOOT_CMD(DMAINFO) = MK_CMD_ENTRY(
-	"dmainfo",	1,	1,	do_dmainfo,
+U_BOOT_CMD(
+	dmainfo,	1,	1,	do_dmainfo,
 	"dmainfo - print SDMA/IDMA registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(FCCINFO) = MK_CMD_ENTRY(
-	"fccinfo",	1,	1,	do_fccinfo,
+U_BOOT_CMD(
+	fccinfo,	1,	1,	do_fccinfo,
 	"fccinfo - print FCC registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(BRGINFO) = MK_CMD_ENTRY(
-	"brginfo",	1,	1,	do_brginfo,
+U_BOOT_CMD(
+	brginfo,	1,	1,	do_brginfo,
 	"brginfo - print Baud Rate Generator (BRG) registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(I2CINFO) = MK_CMD_ENTRY(
-	"i2cinfo",	1,	1,	do_i2cinfo,
+U_BOOT_CMD(
+	i2cinfo,	1,	1,	do_i2cinfo,
 	"i2cinfo - print I2C registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(SCCINFO) = MK_CMD_ENTRY(
-	"sccinfo",	1,	1,	do_sccinfo,
+U_BOOT_CMD(
+	sccinfo,	1,	1,	do_sccinfo,
 	"sccinfo - print SCC registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(SMCINFO) = MK_CMD_ENTRY(
-	"smcinfo",	1,	1,	do_smcinfo,
+U_BOOT_CMD(
+	smcinfo,	1,	1,	do_smcinfo,
 	"smcinfo - print SMC registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(SPIINFO) = MK_CMD_ENTRY(
-	"spiinfo",	1,	1,	do_spiinfo,
+U_BOOT_CMD(
+	spiinfo,	1,	1,	do_spiinfo,
 	"spiinfo - print Serial Peripheral Interface (SPI) registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(MUXINFO) = MK_CMD_ENTRY(
-	"muxinfo",	1,	1,	do_muxinfo,
+U_BOOT_CMD(
+	muxinfo,	1,	1,	do_muxinfo,
 	"muxinfo - print CPM Multiplexing registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(SIINFO) = MK_CMD_ENTRY(
-	"siinfo",	1,	1,	do_siinfo,
+U_BOOT_CMD(
+	siinfo,	1,	1,	do_siinfo,
 	"siinfo  - print Serial Interface (SI) registers\n",
 	NULL
 );
 
-cmd_tbl_t U_BOOT_CMD(MCCINFO) = MK_CMD_ENTRY(
-	"mccinfo",	1,	1,	do_mccinfo,
+U_BOOT_CMD(
+	mccinfo,	1,	1,	do_mccinfo,
 	"mccinfo - print MCC registers\n",
 	NULL
 );